Comparing EDM 760 and EDM 790 System
EDM 760 and EDM 790 are near identical EDM’s. The major difference being that EDM 790 is equipped with a full colour TFT screen. Both Engine Data Monitors are manufactured by J.P.I - World leader in aircraft EDM systems. EDM 760 and EDM 790 provide the pilots with real time information on the status and health of the aircraft engine. They constantly monitor the health of the aircraft engine and any red-line events are instantly brought to the pilot’s attention via audio-visual alarms. This leaves the pilots to concentrate on the flight experience rather than constantly monitoring gauges. EDM 760 1) From $3,675.00 to $8,1000.00 2) 29, 4 times/second Linearized 3) 0.1 percent or 2 F° 4) FAA and thus TSO’d (Technical Standard Order) 5) Microprocessor 6) 2 buttons on faceplate 7) 29 Alarms, including Shock Cooling, EGT 8) Differential, Fuel flow and Alternator Voltage. 9) Patented LeanFind Mode automatically identifies the first and last cylinder to peak and while patented PeakFind system has quick responding probes to automatically capture EGT or TIT peak value. 10) Data Port 11) 25 hours 12) FAA approved Fuel-flow monitoring system. 13) 29 channels 14) Quick response probes 15) All required harnesses 20 ft 16) EZPlot-1 program for plotting and downloading data 17) Single colour (Orange) TFT Screen 18) TSO’d for Quality and Reliability with FAA, STC approved Fuel Flow 19) 3 years EDM 790 1) From $3,675.00 to $8,1000.00 2) 29, 4 times/second Linearized 3) 0.1 percent or 2 F° 4) FAA and thus TSO’d (Technical Standard Order) 5) Microprocessor 6) 2 buttons on faceplate 7) 29 Alarms, including Shock Cooling, EGT 8) Differential, Fuel flow and Alternator Voltage. 9) Patented LeanFind Mode automatically identifies the first and last cylinder to peak and while patented PeakFind system has quick responding probes to automatically capture EGT or TIT peak value. 10) Data Port 11) 25 hours 12) FAA approved Fuel-flow monitoring system. 13) 29 channels 14) Quick response probes 15) All required harnesses 20 ft 16) EZPlot-1 program for plotting and downloading data 17) Full colour TFT screen 18) TSO’d for Quality and Reliability with FAA, STC approved Fuel Flow 19) 3 years EDM 760 & 790 features at a glance: • LeanFind (tm) software performs LOP and ROP automatically finds the first and last cylinder to peak. • Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate. • Voltage, for alternator failure, monitored for over and under voltage with alarms. • Pilot Programmable Hi & Lo alarm limits. All programming from front panel. • All EDM’s TSO’d for quality with a 3 yr. Warranty on the Electronics. • Quick response probes, fastest accurate readings, pre-made harness and hardware. • Data Memory, reading once every 2 to 255 seconds. • EZPlot-1 program for plotting and downloading data. • USB download port built in with memory stick. • Full colour TFT screen 4 inches Diagonal (EDM 790). Visit here for more information : https://www.jpinstruments.com/shop/edm-760/ OR https://www.jpinstruments.com/shop/edm-790/
